Posted on January 7, 2024
Tags: madeof:atoms, craft:sewing, period:victorian, FreeSoftWear

CW for body size change mentions

I needed a corset, badly.

Years ago I had a chance to have my measurements taken by a former professional corset maker and then a lesson in how to draft an underbust corset, and that lead to me learning how nice wearing a well-fitted corset feels.

Later I tried to extend that pattern up for a midbust corset, with success.

And then my body changed suddenly, and I was no longer able to wear either of those, and after a while I started missing them.

Since my body was still changing (if no longer drastically so), and I didn’t want to use expensive materials for something that had a risk of not fitting after too little time, I decided to start by making myself a summer lightweight corset in aida cloth and plastic boning (for which I had already bought materials). It fitted, but not as well as the first two ones, and I’ve worn it quite a bit.

I still wanted back the feeling of wearing a comfy, heavy contraption of coutil and steel, however.

After a lot of procrastination I redrafted a new pattern, scrapped everything, tried again, had my measurements taken by a dressmaker [#dressmaker], put them in the draft, cut a first mock-up in cheap cotton, fixed the position of a seam, did a second mock-up in denim [#jeans] from an old pair of jeans, and then cut into the cheap herringbone coutil I was planning to use.

And that’s when I went to see which one of the busks in my stash would work, and realized that I had used a wrong vertical measurement and the front of the corset was way too long for a midbust corset.

Luckily I also had a few longer busks, I basted one to the denim mock up and tried to wear it for a few hours, to see if it was too long to be comfortable. It was just a bit, on the bottom, which could be easily fixed with the Power Tools1.

Except, the more I looked at it the more doing this felt wrong: what I needed most was a midbust corset, not an overbust one, which is what this was starting to be.

I could have trimmed it down, but I knew that I also wanted this corset to be a wearable mockup for the pattern, to refine it and have it available for more corsets. And I still had more than half of the cheap coutil I was using, so I decided to redo the pattern and cut new panels.

And this is where the “or two” comes in: I’m not going to waste the overbust panels: I had been wanting to learn some techniques to make corsets with a fashion fabric layer, rather than just a single layer of coutil, and this looks like an excellent opportunity for that, together with a piece of purple silk that I know I have in the stash. This will happen later, however, first I’m giving priority to the underbust.

Anyway, a second set of panels was cut, all the seam lines marked with tailor tacks, and I started sewing by inserting the busk.

And then realized that the pre-made boning channel tape I had was too narrow for the 10 mm spiral steel I had plenty of. And that the 25 mm twill tape was also too narrow for a double boning channel. On the other hand, the 18 mm twill tape I had used for the waist tape was good for a single channel, so I decided to put a single bone on each seam, and then add another piece of boning in the middle of each panel.

Since I’m making external channels, making them in self fabric would have probably looked better, but I no longer had enough fabric, because of the cutting mishap, and anyway this is going to be a strictly underwear only corset, so it’s not a big deal.

Once the boning channel situation was taken care of, everything else proceeded quite smoothly and I was able to finish the corset during the Christmas break, enlisting again my SO to take care of the flat steel boning while I cut the spiral steels myself with wire cutters.

I could have been a bit more precise with the binding, as it doesn’t align precisely at the front edge, but then again, it’s underwear, nobody other than me and everybody who reads this post is going to see it and I was in a hurry to see it finished. I will be more careful with the next one.

I also think that I haven’t been careful enough when pressing the seams and applying the tape, and I’ve lost about a cm of width per part, so I’m using a lacing gap that is a bit wider than I planned for, but that may change as the corset gets worn, and is still within tolerance.

Also, on the morning after I had finished the corset I woke up and realized that I had forgotten to add garter tabs at the bottom edge. I don’t know whether I will ever use them, but I wanted the option, so maybe I’ll try to add them later on, especially if I can do it without undoing the binding.

The next step would have been flossing, which I proceeded to postpone until I’ve worn the corset for a while: not because there is any reason for it, but because I still don’t know how I want to do it :)

What was left was finishing and uploading the pattern and instructions, that are now on my sewing pattern websiteas #FreeSoftWear, and finally I could post this on the blog.

1. i.e. by asking my SO to cut and sand it, because I’m lazy and I hate doing that part :D↩︎

blog.trueelena.org/blog/2024/0…

Posted on January 5, 2024

Lately I’ve seen people on the internet talking about victorian crazy quilting. Years ago I had watched a Numberphile video about Hitomezashi Stitch Patterns based on numbers, words or randomness. Few weeks ago I had cut some fabric piece out of an old pair of jeans and I had a lot of scraps that were too small to do anything useful on their own. It easy to see where this can go, right?

I cut a pocket shape out of old garment mockups (this required some piecing), drew a square grid, arranged scraps of jeans to cover the other side, kept everything together with a lot of pins, carefully avoided basting anything, and started covering everything in sashiko / hitomezashi stitches, starting each line with a stitch on the front or the back of the work based on the result of:

import random
random.choice(["front", "back"])

For the second piece I tried to use a piece of paper with the square grid instead of drawing it on the fabric: it worked, mostly, I would not do it again as removing the paper was more of a hassle than drawing the lines in the first place. I suspected it, but had to try it anyway.

Then I added a lining from some plain black cotton from the stash; for the slit I put the lining on the front right sides together, sewn at 2 mm from the marked slit, cut it, turned the lining to the back side, pressed and then topstitched as close as possible to the slit from the front.

I bound everything with bias tape, adding herringbone tape loops at the top to hang it from a belt (such as one made from the waistband of one of the donor pair of jeans) and that was it.

I like the way the result feels; maybe it’s a bit too stiff for a pocket, but I can see it work very well for a bigger bag, and maybe even a jacket or some other outer garment.

blog.trueelena.org/blog/2024/0…

Posted on January 2, 2024

One of the knitting projects I’m working on is a big bottom-up triangular shawl in less-than-fingering weight yarn (NM 1/15): it feels like a cloud should by all rights feel, and I have good expectations out of it, but it’s taking forever and a day.

And then one day last spring I started thinking in the general direction of top-down shawls, and decided I couldn’t wait until I had finished the first one to see if I could design one.

For my first attempt I used an odd ball of 50% wool 50% plastic I had in my stash and worked it on 12 mm tree trunks, and I quickly made something between a scarf and a shawl that got some use during the summer thunderstorms when temperatures got a bit lower, but not really cold. I was happy with the shape, not with the exact position of the increases, but I had ideas for improvements, so I just had to try another time.

Digging through the stash I found four balls of Drops Alpaca in two shades of grey: I had bought it with the intent to test its durability in somewhat more demanding situations (such as gloves or even socks), but then the LYS1 no longer carries it, so I might as well use it for something a bit more one-off (and when I received the yarn it felt so soft that doing something for the upper body looked like a better idea anyway).

I decided to start working in garter stitch with the darker colour, then some garter stitch in the lighter shade and to finish with yo / k2t lace, to make the shawl sort of fade out.

The first half was worked relatively slowly through the summer, and then when I reached the colour change I suddenly picked up working on it and it was finished in a couple of weeks.

looks denser in a nice way, but the the lace border is scrunched up.

Then I had doubts on whether I wanted to block it, since I liked the soft feel, but I decided to try it anyway: it didn’t lose the feel, and the look is definitely better, even if it was my first attempt at blocking a shawl and I wasn’t that good at it.

I’m glad that I did it, however, as it’s still soft and warm, but now also looks nicer.

The pattern is of course online as #FreeSoftWear on my fiber craft patterns website.

1. at least local to somebody: I can’t get to a proper yarn shop by foot, so I’ve bought this yarn online from one that I could in theory reach on a day trip, but it has not happened yet.↩︎

blog.trueelena.org/blog/2024/0…

Posted on December 30, 2023

By the influencers on the famous proprietary video platform1.

When I’m crafting with no powertools I tend to watch videos, and this autumn I’ve seen a few in a row that were making red wool dresses, at least one or two medieval kirtles. I don’t remember which channels they were, and I’ve decided not to go back and look for them, at least for a time.

Anyway, my brain suddenly decided that I needed a red wool dress, fitted enough to give some bust support. I had already made a dress that satisfied the latter requirementand I still had more than half of the red wool faille I’ve used for the Garibaldi blouse (still not blogged, but I will get to it), and this time I wanted it to be ready for this winter.

While the pattern I was going to use is Victorian, it was designed for underwear, and this was designed to be outerwear, so from the very start I decided not to bother too much with any kind of historical details or techniques.

I knew that I didn’t have enough fabric to add a flounce to the hem, as in the cotton dress, but then I remembered that some time ago I fell for a piece of fringed trim in black, white and red. I did a quick check that the red wasn’t clashing (it wasn’t) and I knew I had a plan for the hem decoration.

Then I spent a week finishing other projects, and the more I thought about this dress, the more I was tempted to have spiral lacing at the front rather than buttons, as a nod to the kirtle inspiration. It may end up be a bit of a hassle, but if it is too much I can always add a hidden zipper on a side seam, and only have to undo a bit of the lacing around the neckhole to wear the dress.

Finally, I could start working on the dress: I cut all of the main pieces, and since the seam lines were quite curved I marked them with tailor’s tacks, which I don’t exactly enjoy doing or removing, but are the only method that was guaranteed to survive while manipulating this fabric (and not leave traces afterwards).

While cutting the front pieces I accidentally cut the high neck line instead of the one I had used on the cotton dress: I decided to go for it also on the back pieces and decide later whether I wanted to lower it.

Since this is a modern dress, with no historical accuracy at all, and I have access to a serger, I decided to use some dark blue cotton voile I’ve had in my stash for quite some time, cut into bias strip, to bind the raw edges before sewing. This works significantly better than bought bias tape, which is a bit too stiff for this.

For the front opening, I’ve decided to reinforce the areas where the lacing holes will be with cotton: I’ve used some other navy blue cotton, also from the stash, and added two lines of cording to stiffen the front edge.

So I’ve cut the front in two pieces rather than on the fold, sewn the reinforcements to the sewing allowances in such a way that the corded edge was aligned with the center front and then sewn the bottom of the front seam from just before the end of the reinforcements to the hem.

The allowances are then folded back, and then they are kept in place by the worked lacing holes. The cotton was pinked, while for the wool I used the selvedge of the fabric and there was no need for any finishing.

Behind the opening I’ve added a modesty placket: I’ve cut a strip of red wool, a strip of cotton, folded the edge of the strip of cotton to the center, added cording to the long sides, pressed the allowances of the wool towards the wrong side, and then handstitched the cotton to the wool, wrong sides facing. This was finally handstitched to one side of the sewing allowance of the center front.

I’ve also decided to add real pockets, rather than just slits, and for some reason I decided to add them by hand after I had sewn the dress, so I’ve left opening in the side back seams, where the slits were in the cotton dress. I’ve also already worn the dress, but haven’t added the pockets yet, as I’m still debating about their shape. This will be fixed in the near future.

Another thing that will have to be fixed is the trim situation: I like the fringe at the bottom, and I had enough to also make a belt, but this makes the top of the dress a bit empty. I can’t use the same fringe tape, as it is too wide, but it would be nice to have something smaller that matches the patterned part. And I think I can make something suitable with tablet weaving, but I’m not sure on which materials to use, so it will have to be on hold for a while, until I decide on the supplies and have the time for making it.

Another improvement I’d like to add are detached sleeves, both matching (I should still have just enough fabric) and contrasting, but first I want to learn more about real kirtle construction, and maybe start making sleeves that would be suitable also for a real kirtle.

Meanwhile, I’ve worn it on Christmas (over my 1700s menswear shirt with big sleeves) and may wear it again tomorrow (if I bother to dress up to spend New Year’s Eve at home :D )

1. yep, that’s YouTube, of course.↩︎

blog.trueelena.org/blog/2023/1…