/me, pouring water in the transparent teapot: this green #tea is really pale, it will probably be very delicate
/me, 3 minutes later: wait, that water is *really* pale
looks at the still sealed bag of tea
(and it's not even a *morning* tea, here it's afternoon)
rag. Gustavino Bevilacqua reshared this.
The hot air soldering station set at 260°C worked quite nicely to warm up a pair of needles to bend them for coptic #bookbinding.
Better than using a candle flame, I'd say, as there was no soot to clean up afterwards.
reshared this
uops, apparently it's not safe for me to go to the haberdashery to buy just a spool of buttonhole thread.
No, I don't know what to do with it, yet. maybe on a skirt? maybe on a capelet? maybe on a decorative apron of some kind? right now it will go in the stash until I find the right fabric and the right project.
reshared this
How to program an attiny85 from arduino ide, in linux.
Having looked at many instruction on the internet, those are the more complete (and working) I have found:
gist.github.com/Ircama/22707e9…
TL;DR:
1) open Arduino Ide from your preferred linux distro (mine is debian/testing)
2) File -> Preferences -> Additional Board Manager Url
3) add this link raw.githubusercontent.com/Armi…
4) ok
5) Tools -> Board Manager, add Digistump AVR Boards
6) Tools -> Board -> Digistump AVR Boards -> Digistump
Now it's all classic "Verify" "Upload" steps to program the attiny85
Yesterday we went for a walk and @Diego Roversi took a few pictures of the flannel shirt I've just finished (and I forgot to button it up completely before the pictures were taken, uoooops)
The pattern is always sewing-patterns.trueelena.org/… , but I've cut away the excess material in the front rather than pleating it.
#sewing #HistoricalSewing #1880s @sewing group #FreeSoftWear
like this
reshared this
@Rag. Gustavino Bevilacqua I've never really used the pockets in shirts, so no (not yet?)
there are two pockets in the skirt, plus access to the detached pockets below it, of course.
sewing group reshared this.
Elena ``of Valhalla'' likes this.
Project red shirt has started!
red as in Garibaldi, not as in Star Trek, and right now I've only done one cut, and then moved on to other things (it was time for tea :D ), but I plan to finish cutting most pieces tomorrow and then start (slowly) #sewing
reshared this
I've stopped procrastinating sewing in the sleeves!
ok, technically I'm procrastinating right now, by writing this comment, but I'm going back to it *right now* :D
(oh, and the collar is finished, and the two side seams have both been felled)
sewing group reshared this.
straight part of both sleeves done!
now I have just a bit more time before dinner, but do you think i'm going to press the seam and move on to the gathered part?
nope. brain off. front hem.
sewing group reshared this.
gathered part of one sleeve done, the next will be sewn hopefully tomorrow. Very little hemming done.
I'm starting to suspect that on New Year's Eve I will be making buttonholes while waiting for the new year, rather than wearing the shirt :D
sewing group reshared this.
This morning I took a break to visit the Risorgimento museum in Milan (and spent something like 15 minutes in the small room dedicated to Garibaldi :D ), but still both sleeve seams have been felled!
Tomorrow hem and reinforcement patches (have I ever told I much I hate them?), saturday buttonholes?
reshared this
@Rag. Gustavino Bevilacqua I've already been there, can confirm :D
We still have to go back and visit the last couple of rooms that we didn't have time to visit because the museum was closing down, but we keep postponing it because it's just two rooms, and what if we get lost rewatching everything else, and still miss those?
(no, we've never been thrown out of a museum because it was closing. we always left them with good grace after the second or third announcement that it was closing, *before* they actually have to come and grab us with force :D )
(and it's not because we get there late :D )
reshared this
today I sort of got distracted by polymer clay, but I did finish the hems!
also, I found that the reinforcement patches I've cut are too small, so tomorrow I'll cut new ones. and then buttons and buttonholes.
The plans for the evening (meeting people online) have changed, so there is a decent chance that the dress code will be “evening dress, i.e. pajamas”, but wearing the new shirt on New Year's Day looks feasible.
Also, there is still a bit of thread on the spool, probably enough for the patches.
sewing group reshared this.
aaaaand done! the patches have been added, the shirt can be worn!
I still have to cut and sew at least one detachable collar, but that will happen later, now I think I'll move on to the jacket project and ideally the Augusta Stays.
I hope to be able to take proper pictures of the shirt this weekend!
sewing group reshared this.
I've decided I need to do something vaguely useful with a few microcontroller boards I have, use some of the simple ESP8266 ones to collect temperature and humidity data from various rooms of the house to a MQTT server, collect that data in a RRD and show the current values on an epaper panel together with the current time and weather forecast.
Current status is:
* the MQTT server at home is no longer working (uops, that's why I wasn't receiving other unrelated notifications. I believe I know what the reason is, and how to solve it, but not today. I have mosquitto installed also on the laptop and that one is working)
* the python library I wanted to use to read data from MQTT is broken in debian testing (bug opened at the end of november)
* I can't find the ESP8266 boards. I know that they are around here somewhere, but WHERE???
reshared this
Then, with the board nicely sitting on a breadboard, a stable 3.3V and no ratnest of jumper cables I've seen that the code I wrote last week works: the board turns on, connects and sends the temperature and humidity data from the DHT22 on mqtt, sets a timer and goes into deep sleep.
As long as you don't use Serial.flush(); before going into deep sleep, otherwise it will hang on it until it *gets* a serial, or something, and it will not have a serial while running on battery (uooops).
(yes, the DHT22 seems to be working fine on 3.3V, probably as long as it's close enough to the board that the voltage isn't dropping. and I'm not going to have 5V while on battery, so 3.3V it is)
rag. Gustavino Bevilacqua reshared this.
The Bag of Random Sensors that had the DHT22 also gifted me with 3 (THREE!) BMP280 (temperature and atmospheric pressure, I2C or SPI).
While playing with them I've learned:
* The #esp32c3 can use #i2c on any pin; the default I believe is 8 and 9, but they are also used while programming, so meh
* You can change the i2c pins in #arduino by calling Wire.setPins(I2C_SDA, I2C_SCL); before any Wire.begin();
* There is an example sketch called Wire -> WireScan which scans for i2c devices (you will have to change it to use the pins you want to use with a call to Wire.setPins) which is a godsend.
reshared this
aaaand, temperature and pressure have been read.
for some reason, however, right now arduino isn't compiling the sketch twice in a row (with the error “panic: runtime error: index out of range [9] with length 9”).
But I'll look into it probably during the Christmas holidays, for today I'm ok with this.
oh, right. I was supposed to look into the arduino failures.
instead, I've looked a bit at the python side of things, and surprisingly what I did worked fine, even if it wasn't much.
The whole ESP32 family can do hardware I2C on most of their bidirectional GPIO pins. I2C is a relatively simple protocol that can be simulated in software on any GPIO pin on any MCU (FYI):
github.com/bitbank2/BitBang_I2…
GitHub - bitbank2/BitBang_I2C: A software I2C implementation to run on any GPIO pins on any system
A software I2C implementation to run on any GPIO pins on any system - GitHub - bitbank2/BitBang_I2C: A software I2C implementation to run on any GPIO pins on any systemGitHub
Elena ``of Valhalla'' likes this.
Parola filtrata: nsfw
Elena ``of Valhalla'' likes this.
They've found an unpicked dress and reconstructed the way it has probably been remade four times from an 1740s original into possibly the 1940s.
Students piece together the mystery of a 280-year-old yellow dress – National Trust
Fragments of yellow silk discovered in a bag have been reconstructed into a historically accurate 18th century dress, thanks to a collaboration between the National Institute of Dramatic Art (NIDA) and the National Trust (NSW).National Trust
reshared this
I couldn't help but shudder at the fourth item, just a little jacket? Were they mad? That looks like a home sewer who had no idea what it was, somehow got this and had a go at remaking it. Oh dear god...
Elena ``of Valhalla'' likes this.
TFW you want to do something, but you're too tired and unfocused to decide what to do, so you start taking notes on #train timetables and possible alternatives for a commute. for somebody else.
and somehow you're focused enough that it works :D
From today's wikipedia trip: a 1920 ad for work clothing that mentions that they are made by unionized workers.
en.wikipedia.org/wiki/File:Rai…
(sorry, I don't have the energy right now to copy the rest of the text, it's mostly what one would expect, but if somebody can write a complete image description I'd be grateful)
reshared this
Today I've been "nerd snipped" by a friend.
He had to write some excel formulas, and he was writing them in 'pseudocode' before putting the formula together, while commenting about "why I can't write formulas in a sane language".
So I've spent my evening (and part of my night) doing this:
Next step: a web page to run it in a browser :D
Hypolite Petovan likes this.
I've published a new pattern, for classic jeans.
sewing-patterns.trueelena.org/…
They are based on a menswear block, so for people who need more fullness in the front than in the back; one day I will also draft the same pattern based on a womanswear block, but right now I don't need jeans-like trousers in non-denim and I don't have a source for decent denim, so don't hold your breath for it :)
@sewing group @FreeSoftWear group #sewing #sewingPattern #jeans
reshared this
sewing group reshared this.
@Mre. Dartigen [maker mode] let me know how it works!
I'm not sure how easy valentina is to use (even if just to enter the measurements and print out an existing pattern), and I'm not proficient enough to write a guide myself :(
And if you have any doubts on the instructions part feel free to ask! That part I take full responsibility for :)
reshared this
Things I've done lately:
- Dist-upgraded my VPS from Debian 10 to Debian 11
- Updated the ansible playbook which configure my VPS almost up to date with the real state of my VPS. Things have started to diverge many moons ago. Now is quite back on track to be able to run without any unwanted side effects
- Installed Dentrite matrix homeserver with a couple of bridges, using the aforementioned ansible playbook
like this
Status update on the flannel shirt: all of the main pieces have been assembled, two buttonholes out of five have been done. I still have to fell the seams on the sleeves and the sides, and hemstitch the hems. And then I must not forget the reinforcement patches at the sides and sleeves. The one I've almost forgotten about about every time I think on what's still to do on the shirt :D
Being able to wear it this weekend is starting to sound feasible, unless something unexpected happens.
reshared this
all 5 buttonholes done, all 6 buttons attached (there is an additional button in the center back of the collar for detached collars).
still missing: hemming and reinforcement patches.
chances of wearing it in the weekend: very high (but I hope I'm not jinxing it)
sewing group reshared this.
hem done!
And I've also added a button that was missing to the white linen shirt of the same pattern.
tomorrow I'll cut, press (that's going to be a hassle) and sew the reinforcement patches, and then it will be done!
And then on the pile I have the facing of the bathrobe and — cough — a couple of things that I really would love to have mended :D
sewing group reshared this.
reinforcement patches, done!
the shirt is complete!
I'll wear it (and take photos) in the weekend!
sewing group reshared this.
I have a problem: the tutorial¹ I'm following says to leave the thing in a warm place until it's dry enough that the cat will sleep on it, but I currently don't have a cat.
pliz help: what should I do? wrong answers only :D
(no pictures, because it's white linen fabric wet with xantan gum on white poster paper in low light, and I didn't even try. just imagine you're on a low bandwidth connection and you're reading the image description here.)
Elena ``of Valhalla'' likes this.
#til that there is yet another #fabric-based thing that is called buckram and it has some similarities, but is definitely a different thing from the other two I knew.
A mesh material used to make fursuit eye pieces.
(The other two are the buckram used in hats and the one used to stiffen stays)
I was outside for a walk with @Diego Roversi , and asked him to come with me to a #fabric shop, so that I could buy exactly what I needed (to wrap christmas packages), with no time to look around at what they had and get ideas.
We did. I got what I needed. We payed.
And then just before leaving I noticed some nice woolens. And I may have taken a picture and sent it to my mother.
To be continued... :D
A proposito di caffé d'orzo, l'ho detto che i coperchi dei barattoli del caffé d'orzo funzionano come tavolozze su cui il colore si pela via per gli acrilici?
(this post in italian because I'm talking about food packaging found in the italian supermarkets)
rag. Gustavino Bevilacqua reshared this.
Il caffè d'orzo mi fa abbastanza angoscia¹: vedrò cosa trovo di equivalente.
Che tipo di plastica dice il simbolo del riciclaggio al di sotto?
Molto facilmente potrebbe essere HDPE.
it.wikipedia.org/wiki/Codici_d…
~~
¹ termine usato gergalmente da queste parti al posto di "schifo".
@ndo
Ma no, mi basta sapere che tipo di plastica è.
Se è HDPE fondo un po' di tappi dell'acqua minerale e via: li ho tenuti da parte per vedere se trovo il tempo di aggregarmi a Precious Plastic.
Say hi to the Precious Plastic Universe
The alternative plastic recycling system run by people.preciousplastic.com
LDPE
ma te ne devo tenere un po' da parte e prima o poi portartene qualcuno?
io di solito faccio fuori una confezione di caffé d'orzo ogni 10 giorni :)
Il polietilene bassa densità è quello delle bottiglie dell'acqua minerale, si trova a vagoni.
Elena ``of Valhalla'' likes this.
I still have to finish other handsewn things, but I have the cutting mat on the table, and I decided I might as well start cutting the #AugustaStays, and then maybe later in the weekend I can make the buckram.
Natural linen would have probably been better than white¹, but oh well, in 200 years they are going to be yellow too :D and they will be trimmed with powder blue cotton
¹ yes, it's white³, the blue tint is courtesy of the vintage effect² in the pinephone camera :D
² no, it can't be turned off :D
³ and now I must look for a UV light to find out whether it's merely bleached or it also has optical whiteners, but I don't know where it is
reshared this
there is only one place our UV light usually ends up. Children room 2 😜
(also I miss sewing but what can one do. Too many hobbies 🤷 )
@Beko Pharm we don't have children, but the engineer knew where it was.
that counts as almost a children, right? :D
(and btw, the answer is yes, it has optical whiteners)
sewing group reshared this.
Third layer cut!
I was tempted to only use two layers for the straps, since this time they wouldn't fit under piece A, but then I tried to squeeze it somewhere else and… WIN.
sewing group reshared this.
rag. Gustavino Bevilacqua reshared this.
Elena ``of Valhalla'' likes this.
@Fabio it does have nanowar blasting¹ out of the stereo quite often :D
(and so does my mind, now. :D)
¹ FSVO blasting :D
Beside the nightgown, the sewing plan for this week involved making a second bathrobe like the one I made a few weeks ago (in the picture, this one is a darker gray) so that a) I now have a SPARE! (rather than just one disintegrating bathrobe :D ) b) the bulky fabric isn't taking up space in the stash anymore c) I've taken improved step-by-step pictures to publish the pattern.
Today I've done all of the machine sewing, I only have to hemstitch all of the binding by hand (because I'm a masochist).
And this makes it three garments for which I have written instructions, taken pictures, and “only” need to edit those pictures and add them to instructions to be able to publish the pattern.
reshared this
sewing group reshared this.
@Teffer and people who has made 18th century #stays : I'm reading the instructions for the #AugustaStays and they say to layer the fabric, starting from the outside, as outer layer, heavyweight linen interlining, buckram, so that buckram is towards the body, with just the optional lining separating it from the shift.
Do you have any idea why it isn't layered as outer layer, buckram, heavyweight lining?
sewing group reshared this.
Elena ``of Valhalla'' likes this.
sewing group reshared this.
Germany has defeated (will defeat?) England 4-2 at the final, but one of the players (sorry, I didn't catch the name) has been hurt because of a foul committed by England.
I've seen it in a dream.
There, now you know how it will end, so there is no need to watch any of the matches, and you can all boycott this world cup :)
reshared this
@Julian Andres Klode 🏳️🌈 I think I've seen some posts on the topic even here on the fediverse, yes.
I'm not sure whether it was people watching it, people wishing to watch it, but who were doing an effort to boycott it or what.
Elena ``of Valhalla'' likes this.
Nella categoria THIS IS INSUBRIA, nel forno al momento c'è un pane fatto con 100 g di farina di mais (fumetto), 50 g di farina di grano saraceno, 650 g farina bianca forte, 480 g di acqua (e 3 g di lievito secco, e 13 g di sale).
non ci saranno foto.
però vi farò sapere se è un abominio, o se viene degno del Nord (detto con la voce di Rob Stark, ovviamente) :D
reshared this
Elena ``of Valhalla'' likes this.
TFW you realize you've been cleaning and oiling a domestic power tool while it was on, because the sun was shining on the lamp and you couldn't see it was on.
luckily, my foot was quite far from the pedal, so the actual risk was minimal.
@Gustavino Bevilacqua with the woodworking power tools? of course I would always do that!
the sewing machine? it has a plug? I thought it was directly connected to the mains :D
(I know)
One thing that I've seen mentioned less than other #fediTips these days is that in the fediverse culture the number of followers isn't considered important, having *mutuals* is.
Some instances even hide the number of followers and people followed, and users can do so for their own account.
Even when it's visible, having a huge number of followers and following very few people is looked at as a oddity, and a sign of somebody who's probably not interested in interacting with people, and thus is not really part of the fediverse culture.
The converse is also true: users with almost no followers who follow a lot of people (unless they are really new) give a bad “bot” vibe, and people in the fediverse tend to be wary of them.
Having a reasonable number of both followers and people followed is seen as ideal.
This doesn't mean that you have to follow everybody who follows you! curating the list of people you follow is an important part of the fediverse experience, and you should only follow people whose posts are of interest to you and will make your life better. However I'd recommend giving at least a chance to everybody who follows you, looking at their profile and posts and consider whether you want to follow them.
And then, remember that unfollowing people is perfectly acceptable and requires no explanation: following somebody is not a long term commitment and consent can be given and taken away at any time.
like this
reshared this
I was shocked and offended by the fact that neither units nor qalc (the command line programs) know about the talent unit of weight.
except I was wrong, units *does* know about the talent, but only the Attic and the Aeginetan ones.
It's still missing the Babylonian one, which is the one I was looking for, but nevermind.
(also: 90 kg for an axe? 60 kg for the blade of a dagger? 300 kg carried by one person? I can see how one needs to be two thirds god to use this kind of equipment :D )
rag. Gustavino Bevilacqua reshared this.
@bookandswordblog thanks, I didn't know livius.org (woooops, there goes my weekend :D )
I found something pretty similar on wikipedia, which is how I got the round numbers above.
elastane. aka the Bane of Humanity.
Mind you, I admit that elastane in knits is pretty useful, and it helps them do what it's in the nature of knits to do.
But wovens. wovens are supposed to be dimensionally stable, not elastic!
And who in their right mind has *ever* thought “this silk satin would be better if it had a bit of elastane in it”???
(I only had to cut a square, and I had to measure it something like 12 times)
Maybe you can make the same for elastane.
the problem isn't that it shrinks or expands in a consistent way. the problem is that, being silk satin, it shifted and moved as if possessed. and when I tried to pull on it gently to try and get a straigth line, the elastane would stretch, and then shift even more when I released it.
And it's not like it's doing anything useful.
rag. Gustavino Bevilacqua reshared this.
Prendete il pane raffermo di una settimana, fatto avanzare apposta. è misto, contiene pane bianco, semintegrale, ma anche pane con farina di mais, perché THIS IS INSUBRIA.
tagliatelo a pezzi, e seguite la vostra ricetta preferita della pappa al pomodoro, in quantità superiori al fabbisogno. Col pane con farina di mais dentro, perché THIS IS INSUBRIA.
Poi a cena prendete la pappa al pomodoro avanzata dal pranzo, metteteci dentro della trita di pollo, fatene delle polpette e cuocetele in padella, riciclando il piatto che è stato inventato per riciclare :D
E poi al pranzo dopo ci son le polpette avanzate dalla cena da scaldare al volo in forno :D
reshared this
Elena ``of Valhalla'' likes this.
Elena ``of Valhalla'' likes this.
Elena ``of Valhalla''
Unknown parent • •@Sibylle I wouldn't mind. the phone minds a bit more, at this hour in the night¹ :D
The white part is a reflection of the light, they are just regular big sewing needles (size 2 sharps - I believe that bookbinding needles should have a rounded tip, but right now this is what I have)
Now that I've tested them, I believe that they will have to be bent a bit more, especially the top one.
I don't think tomorrow I'll have time to shoot proper pictures, but I hope in the weekend I will.
¹ it's not really night, it's just dark :)
Elena ``of Valhalla''
in reply to Elena ``of Valhalla'' • •